How is Calgary lot grading signed off?
How is Calgary lot grading signed off?
Calgary lot grading is signed off by the City of Calgary through a grading certificate inspection, typically required as a condition of your development or building permit. Before the City will issue a final occupancy permit or close out your permit file, you need to demonstrate that your lot drains correctly and meets the approved grading plan.
Here's how the process works in practice. When you pull a building permit for a new home, addition, or significant landscaping change, the City of Calgary requires a Lot Grading Certificate prepared by an Alberta Land Surveyor (ALS) or a Professional Engineer (P.Eng.). This is not something a homeowner or general contractor signs off on themselves — it must come from a qualified professional who physically surveys the lot elevations and certifies that drainage conforms to the approved grading plan on file with the City.
The surveyor or engineer will measure actual grades around the foundation, along property lines, at the front and rear of the lot, and at any drainage swales. Calgary's standard requires that lots drain away from the foundation (minimum 2% slope for the first 1.8 metres from the foundation wall) and that water flows to the street, lane, or a designated drainage swale — not onto neighbouring properties. Given Calgary's expansive clay soils, proper grading isn't just a bureaucratic box to check — it's critical to preventing basement water intrusion and foundation movement over time.
The typical process looks like this:
- Grading is completed by your contractor after construction or landscaping is done
- You hire an ALS or P.Eng. to survey the lot and prepare a grading certificate
- The certificate is submitted to the City of Calgary Development and Building Approvals
- A City inspector may do a site visit, or they may accept the sealed certificate on its own, depending on the project type
- Once accepted, the grading condition on your permit is cleared
One important Calgary-specific note: chinook freeze-thaw cycles and clay soil settlement mean grading can shift in the first year or two after construction. If you're in a new community, your builder is typically responsible for ensuring grading meets the certificate before handing over the lot, and the grading is covered under the 1-year labour and materials warranty under the Alberta New Home Warranty Program (ANHWP). If you notice pooling water or drainage toward your foundation within the warranty period, document it and notify your builder in writing immediately.
For existing homes doing landscaping or basement development, check whether your permit conditions include a grading requirement before you close out your permit — the City of Calgary will flag it if it's outstanding.
For questions about your specific permit conditions, contact the City of Calgary Development and Building Approvals at 311 or visit calgary.ca/development. You can also find qualified surveyors and grading contractors through the Calgary Construction Network directory.
Construction Brain — Built by a licensed contractor with 20+ years in the field. Powered by AI with strict guidelines and real building knowledge.
Ready to Start Your Project?
Get a free, no-obligation estimate for your Calgary renovation. Our team at CCN is ready to help bring your vision to life.